Secret & Tutorial How to Hack connected to wifi with android without root for beginner in Bhalswa Jahangirpur

Bhalswa Jahangirpur, Services
 ₹  0

Wifi Hack

Contact details

+91 0812837474

Wifi Hack

Contact details

+91 0812837474



It doesn’t matter what type of WiFi password security is being used by the router, whether it is WEP, WPS, WPA, or WPA2, the hacking methods in this article will easily let you hack into the WiFi network using your Android device without any risk. On a positive note, apart from hacking any stranger’s WiFi network, you can use this guide to test the security of your own WiFi router by hacking into your own wireless network and search for any possible vulnerabilities. ;) Before we begin with the hacking tutorial, it is important to note that in order to hack the WiFi you must need to have a rooted Android device because granting root privilege is important and will help you carry out the following WiFi hacking tasks flawlessly.
There was a time when hackers used to hunt for some specific combination of WiFi network modules and Linux operating system in an attempt to successfully hack wireless networks. But nowadays almost everyone have their own personal mobile phone that is loaded with Android OS, which is open source and if you managed to gain root access then it can be completely modified and can perform all the advanced tasks including WiFi password hacking without any need to invent in any extra hardware.

DISCLAIMER: All the information provided here is for educational purpose only. Trying to hack into anyone else’s WiFi network without prior permission is unlawful and may result in criminal charges. You are solely responsible for what you are doing with the provided tool and information.

Hacking WiFi On Android

There are two easiest and the working methods to hack any WiFi network using your Android device: Using WPS Connect app, Using WIBR+ app. The step-by-step guide for both methods are as follows:

If you have a PC with a wireless network card, then you must have seen many networks around you. Sadly, most of these networks are secured with a network security key.
An internet connection has become a basic necessity in our modern lives. Wireless hotspots (commonly known as Wi-Fi) can be found everywhere!

Cracking those Wi-Fi passwords is your answer to temporary internet access. This is a comprehensive guide which will teach even complete beginners how to crack WEP encrypted networks, easily.
Have you ever wanted to use one of these networks? You must have desperately wanted to check your mail when you shifted to your new house. The hardest time in your life is when your internet connection is down.

If it''s WPA2-PSK passwords you need to crack, you can use aircrack-ng or coWPAtty.
Table of Contents

How are wireless networks secured?
What you''ll need
Setting up CommView for Wi-Fi
Selecting the target network and capturing packets
Now the interesting part... CRACKING!
Are you a visual learner?

Step 1: How Are Wireless Networks Secured?

This is the most basic form of encryption. This has become an unsafe option as it is vulnerable and can be cracked with relative ease. Although this is the case many people still use this encryption.
WPA (Wi-Fi Protected Access)

In a secured wireless connection, internet data is sent in the form of encrypted packets. These packets are encrypted with network security keys. If you somehow manage to get hold of the key for a particular wireless network you virtually have access to the wireless internet connection.

Broadly speaking, there are two main types of encryptions used.
WEP (Wired Equivalent Privacy)

This is the more secure alternative. Efficient cracking of the passphrase of such a network requires the use of a wordlist with the common passwords. In other words you use the old-fashioned method of trial and error to gain access. Variations include WPA-2 which is the most secure encryption alternative till date. Although this can also be cracked using a wordlist if the password is common, this is virtually uncrackable with a strong password. That is, unless the WPA PIN is still enabled (as is the default on many routers).

Hacking WEP passwords is relatively fast, so we''ll focus on how to crack them for this guide. If the only networks around you use WPA passwords, you''ll want to follow this guide on how to crack WPA Wi-Fi passwords instead.

Step 2: What You''ll Need

A compatible wireless adapter:

This is by far the biggest requirement.The wireless card of your computer has to be compatible with the software CommVIew. This ensures that the wireless card can go into monitor mode which is essential for capturing packets. Click here to check if your wireless card is compatible

CommView for Wi-Fi:

This software will be used to capture the packets from the desired network adapter. Click here to download the software from their website.

Aircrack-ng GUI:

After capturing the packets this software does the actual cracking. Click here to download the software from their website.

A little patience is vital.

Step 3: Setting Up CommView for Wi-Fi

Download the zip file of CommView for Wi-Fi from the website. Extract the file and run setup.exe to install CommView for Wi-Fi. When CommView opens for the first time it has a driver installation guide. Follow the prompts to install the driver for your wireless card.
Run CommView for Wi-Fi.
Click the play icon on the top left of the application window.

Start scanning for wireless networks.

CommView now starts scanning for wireless networks channel by channel. After a few minutes you will have a long list of wireless networks with their security type and signal. Now it is time to choose your target network.

Step 4: Selecting the Target Network and Capturing PacketsA few things to keep in mind before choosing the target wireless network:

This tutorial is only for WEP encrypted networks, so make sure you select a network with WEP next to its name. If you need to crack a WPA encrypted network, follow this tutorial instead.
Choose a network with the highest signal.
Each network will have its details in the right column.
Make sure the WEP network you are choosing has the lowest dB (decibel) value.

Once you have chosen your target network, select it and click Capture to start capturing packets from the desired channel.

Now you might notice that packets are being captured from all the networks in the particular channel. To capture packets only from the desired network follow the given steps.

Right click the desired network and click on copy MAC Address.
Switch to the Rules tab on the top.
On the left hand side choose MAC Addresses.
Enable MAC Address rules.
For ''Action'' select ''capture'' and for ''Add record'' select ''both''.
Now paste the mac address copied earlier in the box below.

We need to capture only data packets for cracking. So, select D on the bar at the top of the window and deselect M (Management packets) and C (Control packets).

Now you have to save the packets so that they can be cracked later. To do this:

Go to the logging tab on top and enable auto saving.
Set Maximum Directory Size to 2000.
Set Average Log File Size to 20.

Step 5: Waiting...Now the boring part- WAITING!

NOTE: The amount of time taken to capture enough data packets depends on the signal and the networks usage. The minimum number of packets you should capture should be 100,000 for a decent signal.

After you think you have enough packets (at least 100,000 packets), you''ll need to export them.

Go to the log tab and click on concatenate logs.
Select all the logs that have been saved.
Do not close CommView for Wi-Fi.
Now navigate to the folder where the concatenated logs have been saved.
Open the log file.
Select File- Export -Wire shark tcpdump format and choose any suitable destination.
This will save the logs with a .cap extension to that location.

Step 6: Now the Interesting Part... CRACKING! Download Aircrack-ng and extract the zip file.
Open the folder and navigate to ''bin''.
Run Aircrack-ng GUI.
Choose WEP.
Open your .cap file that you had saved earlier.
Click Launch.
In the command prompt type in the index number of your target wireless network.
Wait for a while. If everything goes fine, the wireless key will be shown.

You may also receive a request to try with more packets. In this case wait until more packets have been captured and repeat the steps to be performed after capturing packets.


Step 7: Are You a Visual Learner?Questions :

on runnin aircrack and clicking launch it shows failed
nest try after 5000 IV''s
please help what to do?

Hi you see 5000 IV''s is the minimum data aircrack needs to work its magic, WEP has 64 bit and 128 bit key, 64 bit key may take about 10.000 -20.000 IV''s to crack however 128 bit needs more I recommend not to start aircrack-ng until you get at least 30.000 DATA. However don''t worry leave aircrack-ng and airodump-ng running and eventually it will work because aircrack-ng is programed to try to crack WiFi password every 5.000 data.

And remember do it only on your own Fifi network because it is illegal to hack or crack public wireless networks! could i find tcp packet from the list.....i cnt check on each individual in the list,they are plenty....plz help me....

Could you help me please I don''t have a wireless card in my computer I''m using a cable? Will it work for mee?

but what if the wifi that appears doesn''t has a password and it doesn''t appears on the adapters only on the commview

best way to do it is to use backtrack 5 never fails ive done it may of times though u have to have a compatible wifi card that works with backtrack 5 if u learn enough commands like i did u could probably hacking anything with bt5 :P though i just commonly use it for wifi only lols i also do a man in the middle attacks on some networks to see what goes on there lol

where I can find the "index number"
help pls

dont try this technic.. its easy but so long. my PC do it in 12 hours on WEP and i have quite good PC. WPA 2 could take like 2 days.. try backtrack
Now the Interesting Part... CRACKING!

Download Aircrack-ng and extract the zip file.
Open the folder and navigate to ''bin''.
HELP!!!! Where is the "BIN"?????

I have the same problem... did you manage to install Aircrack? if you did could you tell me where is the file?
i download the aircrack from this link but its not opening, its saying the compressed folder is invalid
have you got the bin??
anyone here know the easier way to crack?I used this but it cant capture any wifi
Thank you very much, it works! The index number is usually 1. If you dont have BIN folder, download aircrack-ng for windows on the same link.

It says "KEY FOUND", but what should I enter here? I tried entering 1, and this is what it shows:
As you see, It does not show any key here. Can anyone help please??
Can u give me your cell no plz.
how do u get alot of IVS ??? how much packet did u captured ?

The key is clearly shown...
Use that as the password "1981981981"
Your password will be 1981981281.
sorry for the bother,...... I got it

pls help me ??hw u changed dat key into password???
just remove those '':''s and the square brackets.
in my case, the key was 19:81:98:19:81
so the password is 1981981981
... dat works thnk u so much.....
but how can I hack wpa,wpa2 ........wifi password.......

For how long i have to wait for packets ??
It showes -> next try after 5000 IV''s
and also showes -- got 4 IV''s

How you do that i can''t understand
just doble click on it & export file
where I can find the "index number"
index No is 1
How do I get this 5000 IVs?
helo sir
I had captured 10100 packets as shown at the bottom of the dialog box of commview for wifi
but after this command prompt was showing that u had got 14IV''s next try with 5000IV''s
so please tell me that how many packets I have to capture to get 5000IV''s.

I''m getting compatibility error as
"Sorry, Commview for wifi doesn''t support 64-bit windows".
So Can anyone give me the direct download link of "commview for Wi-Fi" for windows 7 64 bit?
My Network Adapter type is Broadcom 802.11b/g WLAN.
I can''t get more than 4000 packets as it allows me only for 5 minutes
can any one help me to get it ful version
commview allows me to capture packets only for 5minutes...can u sen me link for free full version download or mail me a .rar of it...
commonview does not show the list of adapters on clicking start...rather directly starts capturing randomly
i dont speak so very good eglishe.
but i cant get farter than 1% of calculating wps keys.
after 1% wps locked himself for 2 of 3 days :s is ther anny solution ?
withe (black track 3 live wrong forum excuze me)

I''m begging you guys..please put a link or email to me commview for wifi full version..not evaluation version..because it only can capture for 5 minute..not enough packet to capture...please...I''m begging you guys..
that method work 100% thnk you very much. just one question. when i get the password and the owner of the wifi change the code. how i can get it faster? i know that is exist in kali linux ( you get a pin so when he change the password you enter that pin and yu get the password very fast)

so that is exist in commview and aircracker ?? please help me and thanks
Hi, you are talking about a WPS attack...
you did it with the full version of CV? Please share with us! thx
hii evry1...should the os must be windows or linux??? since commVIew asking for windows...nd requirement block says linux!!!

n can i use da same method in da laptop boz i dun hav da wifi adaptor :P :D:) #REPLY
when I click start button the new dialogue box didnt appear. How to select the wifi signal to be cracked?

Hello i downloaded the commview but it works free only for 5 min? do u guys have the program that work with no problems?
hi friends i want to hack wifi but i hack only my mobile.please tell me how to do?thank you
how can i download dis softwear and on which website guys help and u give all the links reguarding this . i ll be very happy.
where can i download des plsss help me?
how can instol a aircrack-ng-1.2-beta3-win plss help me
5 min is just not enough for me. anyone can help ? Please
Hello friends,
Could you tell me how to know wifi password? If I know wifi name only.
I have numerous articles in Null Byte on how to crack wifi passwords. Check them out.
its too difficult

Not really. Depends on the vector, variables and the operator. I was starting to think that too until about 3 weeks ago. ( ISP issued Cisco routers suck more than I thought in a great way).
Can anyone please help me?
I can''t seem to launch the CMD. I see error "Failed to start Aircrack-ng. Aircrack-ng executable" whenever I launch using Aricraft using the .CAP file I saved using CommView. :(
I have that problem when I click RUN instead of EXTRACT. Click extract when you press the file in bin. and try it again :D

i am working in office,where wifi network available. but i dont know the password. They have provided me internet on my desktop computer,which have no wifi.
so i want know the wifi password. i have checked the default the gateway with "ipconfig". my default ip is . when i enter the address in browser. it asks me user name and password
what i enter is
user name;admin
it accecpt the password but does not show me anything, like it shows me all the panels, but does not show me any setting under any setting or any tab. absulately nothing. but panels and menus.
i visted the source panel but has one line says that"you have to enter super password to go management level from current level."

my router is of hp.
Please tell me how can i know wifi password or router password.
thanks in advance
I can''t seem to collect packets can someone help me?
can anybody tells me it works 100%
Nobody uses WEP anymore, it''s so insecure most are on WPA or WPA2 now. If they are still on WEP they deserve to get hacked.

You may also like …

Secret & Tutorial How to Hack connected to wifi with android without root for beginner

Bhalswa Jahangirpur 0


* Required
Write your cover letter
Your contact details